Nestled near the serene Pacific shore in Oxnard, California, stands the cutting-edge Borla Research and Development facility. It is here that Borla engineers meticulously craft exhaust systems from scratch, tailoring each one to deliver the perfect sound for your specific make and model of vehicle. Once the exact specifications are honed, they journey to Borla’s sprawling 100-acre manufacturing complex in Johnson City, Tennessee, nestled beside the legendary Blue Ridge Mountains. It’s in this idyllic setting that raw stainless steel is expertly cut, shaped, assembled, welded, and prepared for shipment. This process exemplifies the spirit of American ingenuity and quality that defines the Borla family, proudly producing top-rated exhaust systems that are ‘Made in the USA’.
Cat-Back Systems: Elevating Automotive Acoustics
The term “Cat-Back” originated with Borla, who revolutionized the concept. Abbreviated from “Catalytic Converter,” a Borla Cat-Back exhaust system encompasses the entire stock system from the catalytic converters all the way back to the exhaust tips protruding from the rear bumper. This comprehensive upgrade delivers the most profound transformation in sound, thanks to enhancements in virtually all undercar piping. Borla’s trademark ultra-smooth mandrel bends, X-Pipe technologies, and precise pipe diameter specifications collaborate to shape an exceptional auditory experience. Catering to a wide array of popular cars and trucks, Borla Cat-Back systems offer a selection of distinct sound technologies — ATAK, S-Type, and Touring — each with its own unique volume and character.
Axle-Back Systems: Precision in Muffler Replacement
While not as extensive as Cat-Back systems, Borla Axle-Back offerings provide an affordable alternative, focusing solely on replacing mufflers, rear piping, and tips. This approach still delivers that unmistakable Borla sound, offering an assertive and impactful note. Available in ATAK, S-Type, and Touring sound technologies, Borla Axle-Back systems allow you to fine-tune your ride’s auditory profile according to your preference, ensuring a distinctive and powerful presence on the road.
Borla Exhaust for 2010-2013 Chevrolet Camaro SS
Discover the perfect Borla performance exhaust system tailored for your Camaro SS, V6, 1LE, or ZL1, offering a range of sound levels to suit your preferences. Whether it’s a cat-back, axle-back, or long-tube header, you can expect maximum horsepower and torque across the entire RPM spectrum. Embrace the power of choice with Borla’s patented XR-1 technology, available in the thunderous ATAK, resonant S-Type, and soothing Touring systems, allowing you to curate your vehicle’s distinctive soundtrack. Crafted from premium T304-series stainless steel, every Borla Exhaust System guarantees top-tier performance and unwavering durability. The manufacturer is committed to delivering products of unparalleled quality and back our systems with a Million-Mile Warranty, ensuring your peace of mind on the road.
Borla Exhaust for the 2018-2022 Honda Accord 2.0T / 1.5T
Experience the impressive engineering of the Borla R&D Team with their meticulously crafted exhaust system designed for your 2018-2022 Honda Accord. Tailored to perfection, this cat-back system is precisely tuned for the Accord’s cutting-edge turbo engine options: the 1.5T and the 2.0T. The S-Type system offers a spirited, sportier sound compared to stock, delivering a refined and far-from-obnoxious tone. Enjoy a drone-free driving experience, ensuring comfort during cruising speeds. By adding a Borla exhaust system to your Accord, you’re not only enhancing its performance but also matching it with an exhilarating sound.
Key Specifications:
- T-304 Stainless Steel
- System Diameter: Single 2.5″ to Dual 2.25″
- Sound Level: S-Type
- Drone-Free Experience
- Easy Bolt-On Installation
- Compatible with Factory Valance Exhaust Tips
Crafted from premium T-304 series stainless steel, each Borla Exhaust System guarantees optimal performance and unmatched durability, setting a new standard in automotive excellence.
Borla Exhaust for the 2015-2017 Ford Mustang
Borla shares your passion for the 2015-2017 Ford Mustang, an iconic symbol of American craftsmanship and reliability. This sentiment resonates deeply with us, as each Borla exhaust system is meticulously designed and handcrafted in the United States, a tradition we’ve upheld since 1978. As proud stewards of Ford’s legacy and racing heritage, Borla offers an extensive range of cat-back™ and Axle-Back exhaust systems tailored for all new Ford Mustang variants: GT, V6, or EcoBoost.
Your Mustang’s sleek, captivating design deserves an equally distinctive sound, one that encapsulates everything you adore about your vehicle, accompanied by horsepower gains that match its formidable prowess on the road or track. A Borla exhaust guarantees precisely that. It’s no wonder Shelby American entrusts Borla with every vehicle they manufacture. Tailor your exhaust note to your liking with our three distinct sound levels: ATAK, S-Type, or Touring.
Key Specifications:
- T-304 Stainless Steel
- Crafted in the USA
- Million-Mile Warranty
- Drone-Free Experience
- Installation: Bolt-On
Borla employs top-tier aircraft-grade T-304 austenitic stainless steel, incorporating mandrel-bent pipes and straight-through mufflers to optimize airflow through your engine. This enhanced airflow is deftly shaped by the 2015-2017 Mustang exhaust system, delivering an assertive, resonant tone across the RPM spectrum while allowing for seamless in-cabin conversations. Installing our bolt-on Mustang exhaust is a hassle-free process, utilizing existing factory mounting points—no cutting or welding required. With enhancements in every facet of your exhaust system, including fuel efficiency, Borla further impresses by offering an extraordinary 1 million-mile warranty on all street systems – that’s 20,000 miles per year for five decades.
Borla Exhaust for 2022-2023 Kia Stinger 3,3L
Borla’s research and development team has crafted an exceptional exhaust system tailored for your KIA Stinger! Specifically designed for the 3.3L V6 Stinger GT, Borla presents the S-Type Cat-Back system. This system is equipped with Borla’s innovative Polyphonic Harmonizer Technology, allowing precise calibration for each application to accentuate the finest notes and harmonics unique to specific engines. While the system is engineered to be compatible with factory valance tips, Borla also offers optional carbon fiber valance tips for those seeking an extra touch of refinement. True to Borla’s signature, the system is meticulously engineered to be drone-free, ensuring an aggressive tone during acceleration while maintaining cabin comfort during cruising.
Key Specifications:
- T-304 Stainless Steel
- Cat-Back System Diameter: Dual 2.25″
- Sound Level: S-Type
- Drone-Free Experience
- Polyphonic Harmonizer Technology
- Optional Carbon Fiber Tips
Every Borla Exhaust System is meticulously crafted from premium T-304 series stainless steel to ensure unparalleled performance and durability.
Borla Exhaust for Nissan Z
The Borla introduces its top-tier exhaust system designed for the seventh generation Nissan Z. Tailored to perfection, Cat-Back systems are available in two distinctive sound levels: S-Type and ATAK. If you’re seeking a sporty resonance with a deeper undertone, the S-Type is an ideal choice. For those desiring an audacious and attention-grabbing sound, the ATAK delivers unrivaled performance. These meticulously engineered exhaust systems are crafted exclusively for the Nissan Z, finely tuned to unleash the full auditory potential of the 3.0L twin-turbo V6 engine. Boasting dual 2.5″ pipe diameter and Borla’s patented Polyphonic Harmonizer technology, these systems are a testament to cutting-edge innovation. The striking 4.5″ exhaust tips are available in chrome or carbon fiber for a personalized touch. Choose how you want to make your presence known with a Borla exhaust system.
Key Specifications:
- Cat-Back Exhaust System
- S-Type & ATAK Sound Levels
- Drone-Free Performance
- Polyphonic Harmonizer Technology
- Dual 2.5″ Pipe Diameter
- Dual 4.5″ Chrome or Carbon Fiber Black Anodized Tips
- Constructed with T-304 Stainless Steel
- Backed by a Million-Mile Warranty
Every Borla Exhaust System is meticulously crafted from premium T-304 series stainless steel, ensuring the pinnacle of performance and durability.
Tailored Excellence: Borla’s Commitment to Automotive Performance
Borla’s legacy as a trailblazer in exhaust technology is not only defined by their meticulous craftsmanship but also by their dedication to enhancing the driving experience. With Cat-Back and Axle-Back systems, Borla provides enthusiasts with a spectrum of options, ensuring that every vehicle benefits from their signature blend of power, precision, and unparalleled sound. Elevate your driving experience with Borla — where every system is a testament to American engineering excellence.
